Category: milling machine

Last Updated on

Investing in a benchtop milling machine is a great choice, but a huge investment. Although, these products might fit on a workbench, a number of them out there are unreliable and picking one that is suitable and without any trouble is a challenge.

In this article, we’ll be giving you reviews on some of the best benchtop milling machines on the market, giving you some tips that will guide you when making a purchase. Our job is to help you find the best benchtop milling machine, with excellent quality, good reviews, that makes an accurate drill and great product. We will help you find an item you’ll use for home and shop at a price that is great. Take a look! These reviews are for you!

Best Benchtop Milling Machine Comparison – Top Picks of 2020

ModelPriceWeightEditor Rating
(Top Pick)

Check Price
413 lbs5.0/5
JET 350017/JMD-15
JET 350017/JMD-15

Check Price
457 lbs4.8/5
OTMT Variable Speed OT2213
OTMT Variable Speed OT2213
(Best for the Money)

Check Price
140 lbs4.7/5
Klutch 2706S009
Klutch 2706S009

Check Price
143 lbs4.4/5
Proxxon 37110
Proxxon 37110

Check Price
18 lbs4.1/5

5 Best Benchtop Milling Machines – Our Reviews

Here’s the review:

  1. SHOP FOX M1110 

Is this machine capable of milling, and drilling, and is it able to do the job well? Well, we can think of no other answer than yes. The Shop Fox M1110 does everything one can reasonably expect, and it does these things without giving its owner any reasons to complain.


Click Here To Check The Latest Price

There are no cool gadgets or accessories on or about it, just like there are none on this or about any milling machine, but it is as efficient as we need it to be. This benchtop milling drill is a great addition to drilling in a compact area. The Shop Fox M1110 not only gives you no reason to complain when it is milling or drilling, it also stays in place while you are working with it, further giving you reasons to love it. The support is enough to make you want this table.

Its handles fit nice and snug, and the machine gives good enough precision. One more thing about the Shop Fox M1110 is that it is expensive. If price is a factor in which benchtop product you’ll use, make sure you are okay with the price. Overall, it is quite a good machine.


  • It is precise
  • It is steady
  • It is sturdy


  • It is expensive
Click Here To Check The Latest Price
  1. SHOP FOX M1111 Table Top Machine

Just by seeing the machine alone, you most probably can tell the details of it. This machine is a high-quality industrial item that can withstand the rigors of heavy-duty, if it is to be utilized on a regular basis. It has a high horsepower of 220V motor, and a subtle adjustable speed controls, but the machine’s regulating jib lacks precision.

shop M111

This machine’s main part is the longitudinal feed hand wheel. You can also get a clear guard on the spindle, and this is applicable to specific products. This machine’s dimension is 26.5 x 21.5 x 18 inches.

  1. JET 350017 

This JET machine has some integrated control software. What this means is that the machine is controlled by its own unique control software. The operators of this machine need to have the technical know-how in the world of programming, so as to control the computerized machining centers when performing some of the high precision milling operations.

When compared to some of the traditional milling machines, most of the JET CNC milling machining centers have the ability to perform some high precision milling operations and help to reduce some unnecessary waste. This is a very durable machine, as it was designed with high-quality materials.

jet benchtop

Its quick-tilt headstock, its backlit digital tachometer, a great hand wheel placement, the cross-feed handwheel, making it stand out from its counterpart in the market. This compact drilling product is a benchtop dream drill.


There really is not a great review of this benchtop milling machine. It feels like a product not ready to be used. Its base looks weak, and the parts where the work has to be done felt like it might disassemble at any moment.

It does have a great compact product design. It is best to use for when you want to do any small, accurate, quality work, but nothing heavy. To use, you’d probably need to always retighten its chuck, and you will find that its base moves when in use; therefore making precision impossible.

KLUTCH 2706S009

Click Here To Check The Latest Price

This machine, as stated earlier, is great for small accurate jobs. It is able to do the big jobs, but it doesn’t seem like its manufacturers were keen on it doing that. If you know that you want to do some serious milling or drilling, don’t consider buying this. In summary, good enough for small, accurate jobs.


  • It has a nice compact benchtop design


  • Its parts are unsteady
Click Here To Check The Latest Price
  1. Mophorn Mini Milling Machine

The Mophorn Mini Milling Machine product absolutely makes your work easier and, to make that possible it has some interesting features like the sloping head and multifunction digital scale that can be found on the quill. And with its more than 14 inches of headstock movement that is accessible, this machine can handle projects that vary in sizes.


With this machine’s many user-friendly features like the easy to see markings on the scale, it is very accessible. This tool comes with two battery tool bags along with a charger. This tool is made with the finest aluminum material, and its design is greatly balanced.

It is totally safe for use and it is also secure, as when it is in use, it stays in position, so the user does not have to constantly battle with keeping it steady to achieve a great result. It is durable since it is designed with high-quality materials. It is lightweight, making it easy to carry from one place to the other.

It has a tilting column that allows for the drilling and milling of workpieces at a 90-degree angle. This machine is supplied with a 13 mm chuck accessory kit that is useful for adjusting and setting. 

The tool’s lathe bed is made of high-grade iron. The lathe is rigid, and the hardness and accuracy of the v-slideways are made possible by obtaining raw materials. Heat hardening and grinding.

  1. Erie Tools Milling Machine

The Erie Tools Mini Milling Machine is a heavy-duty variable speed that comes with a standard high-speed steel 6-piece 4 Flute with a 3/8 inches shank cutter set.

This shank cutter set includes 1/8 inches, 3/16 inches, ¼ inches, 5/16 inches, 3/8 inches, and 5/32 inches size cutter sets. It comes with a drilling and end mill capacity of 3/8 inches along, with a face mill capacity of 5/8 inches.


Its other features include:

  • A geared drive
  • A safety shutoff switch
  • Clear guard on its spindle
  • Lifting hand wheel
  • Fine feed hand wheel
  • An adjustable depth stop
  • Variable speed control
  • This machine is designed for drilling, deep milling, and face milling
  • It comes with a rubber chip guard on ways

Other features include:

  • Open-end wrenches
  • Hex wrenches
  • Spindle locking pin
  • A drawbar
  • Oil can
  • 4 T-slot nuts, and many more
  1. SUNWIN Metal Mini Milling Machine

The SUNWIN Metal Mini Milling Machine is a tool that is made from both aluminum and casted steel. It is a small and elegant tool that is able to operate the rotation work up to 20000 RPM. Its RPM reach is an amazing capacity that uses just 24 watts and 12 VDC; although, its slide working reach moves from 30 to 50 millimeters long.

The finishing of this machine is made of metal. The makers of this tool have made sure that this is not just any small machine, but one that is highly operational.

SUNWIN Metal Mini Milling Machine

The main parts of this tool are: the spindle, the tail stock, pedestal, slider, motor blades, connection piece, the gear adopts full metal structure, and many other features.

The major colors of this machine are red and black classical collocation. It has a motor speed of 20,000 RPM, with a power of 12 VDC, 2A, 24 W, and a slide travel of 30 to 50 millimeters.

  1. Proxxon 34108 Small 

Proxxon is utilized to mill, drill and countersink steel, cast iron, aluminum, brass, and plastic. The headstock swivels through 360 degrees, and this is shown on a scale. Its height can be adjusted through a zero adjustable hand wheel, which can also be utilized as fine feed when milling.

One revolution of this item is equal to 1/32 inches, which is also 1 mm, travel; 1 division is equal to .002 inches. The quill and headstock are usually in a locked position, which is useful for when you are milling.

Its powerful permanent magnet motor drives through a poly-v-belt, producing high torques, especially when it runs at lower speeds. The machine’s hand wheel serves as both height adjustment and fine mill feed. Its poly-v drive system gives 6 speeds between 280 RPM and 2,500 RPM.

One thing to note if you want to get the best results when milling is to lock the headstock into place, and this can be achieved using the FF 230’s lock levers. This benchtop drill table helps make accurate support.

  1. SHOP FOX M1036 Benchtop Milling Machine

It is obvious that to get the best milling results you would equally need to get the best milling machine and the SHOP FOX M1036 is that one good benchtop milling machine.

This device is designed for machining small parts, and it will no doubt give you the desired results. It comes packed with lots of features like a compound slide table, a digital depth readout, and a micro down feed knob and variable speed control.

shop M1036

It also has dials that help improve your precision. These dials can be zeroed in by grasping the knurled section and rotating the dial until it is set to zero.

  1. Proxxon 37110

This is not a full-sized milling benchtop milling machine, and if that is what you are in the market for, this benchtop milling machine, the Proxxon 37110, is the one you should choose. It is the lightest of all the milling machines on this list, weighing 18 pounds, which gives it its portable status. It is, of course, not only the lightest on the list but also the cheapest.

This tool is pretty efficient for small jobs. It has the ability to carry out only a little work. That is it. Once this benchtop milling machine is fired up, and is deep into the work, there begins to be an episode of shaking, and this factor reduces accurateness, the precision of work.

Proxxon 37110

Click Here To Check The Latest Price

And sometimes, even while working, you could find that it just stops in the middle of a job. It doesn’t look like a product that was built to last a long time.

This product is good if you have pretty limited needs, but its capability is too little for any business, perhaps a home model for the price.


  • Excellent price
  • It works well on small jobs (home or hobby)


  • It shakes
  • It dies very quickly
  1. JET 350017/JMD-15

This machine is big and it is heavy, weighing 457 pounds. What does this mean? It means that the JET 350017/JMD-15 can handle any job, whether big or small, as long as it is appropriate to its size as a milling machine. It has a large table that is large enough to hold the weight of large workpieces, and this machine’s weight holds it in place.

JET 350017/JMD-15

Click Here To Check The Latest Price

It is good on aluminum and thin strips of steel. Its drill works great and everything is where it should be when in use. Although, with these great features come a price that would cost you. It is the most expensive machine on this list, but moderately expensive.

This big machine is capable of handling anything that is expected of a milling machine its size and doesn’t move while you are working with it. Everything about this product is cool, except for its price.


  • It is versatile
  • It doesn’t shake
  • It has a lot of workspaces


  • It is quite expensive

To get any benchtop milling machine that is best for the money, then you’ll have to dip your hands deep into your pockets because they don’t come cheap. There are cheaper models out there, but the problem is with the quality of those models, as they are poor and would cause you to spend extra.

It can take on bigger and tougher jobs than the less expensive ones. And when you compare it to the bigger machines, it is affordable, which makes it the best for the money.


Click Here To Check The Latest Price

Along the X and Y axis, there is slippage, and this could cause a distraction when milling, and you would not want that as you would want to concentrate fully on getting the milling right. This item is affordable and can handle tough things.


  • Good drill for the price
  • Great for repairing firearms


  • Slips in X and Y axis


Before you purchase any milling machine, you have to take your time to check reviews of it before you make that purchase, because this is a very big investment and just going online and buying the first one you see, or that looks cute might cause you to lose out big time. You want to invest wisely. You should carry out some research before setting out to buy a drill.


You could pair this product with the tool user and the tool user’s needs. A very good example of a benchtop milling machine that works well for small jobs is the Proxxon 37110. If used for any other kind of work, say something heavier than usual, it will wear out very quickly. It also is a pretty affordable tool. If in a bid to save yourself from spending extra, you get the wrong size milling machine, you will limit the kind of work that you will be able to do with it.


You will want to be certain that the model you have has good, reliable power because a motor with less power is a motor that will operate in a shorter time than expected.


You want to get a benchtop milling machine that drills a hole at a specific place, and at a specific diameter. You will want a product that has room between the table and headstock so as to accommodate larger pieces. This is why the Shop Fox M1110 is a good choice.

7 Different Types Of Milling Machines

Milling machines come with various functions, and they also come in different types based on certain standardized specifications. The following are the most commonly used milling machines: turret, c-frame, column, horizontal, planner-style, tracer controlled and benchtop milling machines.

A milling machine is a tool used by those in the metal industry, and it has its numerous uses. Each table machine has something called a cutter that operates at a various range of speed so that you are able to form the needed shape.

With their adjustable speed feature, each milling machine can be regulated for a more precise cut. It is capable of handling more than one task, it carries out operations such as carving, drilling, cutting, milling, and threading.

There are various types of milling machines; each comes with varying functions that are based on a standard criterion.

Manufacturers usually name the different machines according to the kind of control, orientation of the spindle, number of axis available, machine’s purpose, its size, and its source of power.

While there are varieties of milling machines on the market today, they each serve the same purpose, but they use different terms.

In this article, we will be giving you the seven types of milling machines:

  1. Turret: Also known as the Bridgeport-type. It can be repositioned at any time, which gives this machine some functionality. It is versatile, which makes it more practical since a variety of products can be made in addition to car parts.
  2. Column: The most common milling machine. It has five basic components: head, knee, work table, saddle, and overarm. It is considered to be the simplest machine type. Its cutting device is suspended vertically so as to allow for the drilling of metals. It is typically used when creating car parts because it is small and handy.
  3. Horizontal: This machine runs parallel to the ground. As it moves up and down, the table on which the tool is placed moves sideways.
  4. C-Frame: This one is sturdier than the turret and is mostly used in industrial-grade operations. It has a hydraulic motor this makes it very powerful.
  5. Bed Type: The worktable can be found positioned on the bed itself and not on top. The knee part of the machine is left out so as to allow for movement in a particular direction.
  6. Trace controlled: This machine is able to reproduce parts based on a master model. It is mostly used by those in the industrial sector because it makes production and specialization of machine parts quite easy. With the plethora of milling machine classifications, you need to make a choice based on how you plan on using the table.
  7. Planner: This one is mostly used for operations in mass production. They are similar to the bed type milling machine, except that it can be mounted with various cutters and spindle heads to the machine.


There are two groups of benchtop milling machines, large ones with lots of support and compact ones. The large ones are designed to take on maximum load, while the compact ones were made to do the small jobs.

For the large ones, the Shop Fox M1110 is the best because of its ability to take on maximum load and the JMD-15 also does the same thing, except for the fact that it has a much higher price.

The OTMT’s Variable Speed OT22123 isn’t the cheapest, but it is affordable and can basically handle everything. The Klutch 2706S009 and Proxxon 37110 are less impressive because if their limited abilities.

We hope that we have been able to help you with these tools and reviews we have provided and we hope that it has been helpful to you. Make sure to do some additional searches on the web for some reviews or buyer reviews, as this will help guide you.